Reviews

RB5000 - Even Out The Cycle Process and Lower Recoil

RB5000 - Even Out The Cycle Process and Lower Recoil

Bought this initially paired with a Wilson Carbine flat spring to even out the feed process on a 350 legend 20inch carbine gas tube. Works great that occasional stove pipe issue disappeared. Replaced the upper with my 18 inch 5.56 again a nice and smooth action. Recoil on both was near 22 LR after install. Will be adding to all my AR builds.

 

James From IN, USA

RB5006 - Works as advertised!

RB5006 - Works as advertised!

Simply put, this hydraulic recoil buffer works. I have it in a DMPS .308 build, tried using the standard buffer weight first then the KynSHOT. Extremely soft recoil.

 

Luke, Florida USA

RB5001 - Smooth As Butter!

RB5001 - Smooth As Butter!

Smooths an already buttery smooth gun out even more!

 

Nate From Pennsylvania, USA

RB5007 - Almost No Felt Recoil - KynSHOT AR 9mm Recoil Buffer

RB5007 - Almost No Felt Recoil - KynSHOT AR 9mm Recoil Buffer

On my AR 15 full length (16 inch barrel) PCC chambered in 9mm, I have been rocking this KynSHOT AR 9mm recoil buffer for about a year now and it is awesome. I have put about 1000 rounds down range rapidly and single shot increments, and it still feels the same as when I first bought it. Just for kicks, I have also used this on 5.56 and its wonderful. The recoil felt is very minimal at single shot increments, at rapid fire, some recoil will be felt. However, please stick to the suggested caliber this was intended for.

 

Lance, USA

Softens Muzzle Movement - KynSHOT AR 9mm Heavy Damped Buffer

Softens Muzzle Movement - KynSHOT AR 9mm Heavy Damped Buffer
This buffer made a noticeable difference in muzzle movement vs a standard PCC buffer system. This along with the spacer created a short stroke system that made second shots faster. For competition use I highly recommend this upgrade.
 
 
Scott From AL, USA 

RB5015HD - Recoil Reducer

RB5015HD - Recoil Reducer

Works great on my competition CA9mm. just removed old buffer and drops right in perfect fit. very noticeable first day shooting muzzle raise was lower for faster follow shot.i would recommend for your 9mm PCC build. 

 

Haze From NC, USA

KynSHOT 9mm Heavy Damped Buffer

KynSHOT 9mm Heavy Damped Buffer

I use this hydraulic buffer with a JP .308 buffer spring and A5 buffer tube in my competition PCC. Using the JP 9mm short stroke BCG makes the gun cycle fast and minimizes recoil. I am surprised at how the gun runs with these components. Some top shooters use this combo and I followed the leader to improve my game.

 

Hammer67 From NH, USA

RB5000L - Perfect for Any 300 Blackout Build

RB5000L - Perfect for Any 300 Blackout Build

This is perfect for any 300 blackout build. I’ve shot subs and super Sonics rounds with this buffer installed and it all cycled perfectly. Definitely recommend this if building from scratch. Wouldn’t hurt to get a JP spring too

 

D.C. From FL, USA

RB5004 - Upgrade to PSA PA-10 308 win

RB5004 - Upgrade to PSA PA-10 308 win

I added this to a PSA PA-10 rifle in 308 Win. 18 inch barrel. The recoil was not bad to begin with but adding this helped reduce felt recoil. My daughter likes this rifle more than her Ruger American in 6.5 CM. Very pleased with it.

 

TX-Ruger From TX, USA

RB5000HP - I Never Leave Reviews, But The People Should Know

RB5000HP - I Never Leave Reviews, But The People Should Know

I originally purchased one of these for my 10.5 inch AR15 pistol. I paired it with a Rubber City Armory titanium lightweight BCG, and I had a WAY LARGER improvement than the 15-30% (as advertised) in recoil reduction, target reacquisition, and overall comfortability while firing the gun. This piece is amazing, and I’ve never had more fun shooting. It eliminates a lot of the fatigue at the range, and also improves every shot after your first one out of the magazine. It’s so smooth following up with your 2nd, 3rd, 4th, 28th shot (etc). 

I now put these in all of my AR15 builds. If you are building your first SBR or AR15 pistol build, I HIGHLY recommend getting a Kynshot buffer. It’s a must have for any build in my opinion.

 

Mike M From MO, USA

Holy Cow This Thing Works Like Butter - KynSHOT Tactical Shotgun Conversion Kit

Holy Cow This Thing Works Like Butter - KynSHOT Tactical Shotgun Conversion Kit

As the title said, this thing works like butter while you shoot, but you need to get used to it from pump style.
I have it on my Beretta 1301 and set on HD=high damp for 00Buck 2/3" 12Ga.
Since Beretta is using gas blink system you have to keep your self stiff up to actually push the gun forward to get the gun to fully cycle through and eject the round. NOTE!! when i first install and compare from Remington 870 pump, i didn't need to stay all stiff with blackhawk knoxx coil shock stock since it is a pump 870. But because Beretta is a gas system, the blow back needs to keep it a bit stiff since the kynshot hydralic ate up all the force for itself to push back, so at this point, you gotta push a bit yourself, seriously took me a minutes to adjust and wonder why the shell got stuck inside a brand new gun at first try.
Anyhow, awesome stuff!!!

 

PL From CA, USA

Night and Day Difference - KynSHOT Tactical Shotgun Conversion Kit

Night and Day Difference - KynSHOT Tactical Shotgun Conversion Kit

Put this in my mossberg 500. There are no instructions for install, but its not rocket science. Do not lose any small parts as they all required & no spares. The install for pistol grip is not ideal, the holes are not threaded, the screw drops in and have to manage to hold the square washer in place while also screwing it in. Definitely need small hands. Also, seems easy to strip the screw, would recommend using loctite. Shot 40 rounds of slugs and the difference in recoil is mind blowing. No more sore shoulder or bruising. Paired this with SB Tactical's BAFTA & now have more room in my safe for an extra shelf!

 

Tay From NJ, USA

.308 Shock Absorber - KynSHOT AR-10 7.62mm/.308 Buffer for Fixed Stocks

.308 Shock Absorber - KynSHOT AR-10 7.62mm/.308 Buffer for Fixed Stocks

I used this with a fixed stock on my AR-10. I changed the barrel from standard 16 inch to a 22 inch so I was looking for some added recoil absorption. Installation was fairly simple and I was able to do it in minutes. I have fired the weapon several times since and recoil was very minimal. I am very pleased with it and would definitely recommend it to anyone looking for better recoil performance.

 

Dre1929 From IN, USA

RB5007 - No Recoil, Keeps On Target Fine

RB5007 - No Recoil, Keeps On Target Fine

308 14oz bolt rifle buffer tube flat wire spring, 3.9 in kynshot works , no spacer.

 

Tom, From Undisclosed

RB5000 - Worth It!

RB5000 - Worth It!

I bought this for my AR and I love it! It's so smooth and my rifle has very little recoil definitely worth buying!

 

JP from Seattle, WA

RB5000 - AR Carbine Recoil Buffer

For those of us older men with severely injured shoulders or arms, this apparatus makes the AR almost recoil free. Love it, can keep rounds on target during rapid fire. Necessary for us older Vets.

 

Daniel, Pagosa Springs, CO USA

RB5015HD - Used on 9mm Build

I used this buffer in my 9mm build and I was AMAZED at how fast I could get back on the follow up targets. You have a customer for life. Great service! 

 

Polaris13, Chardon, OH USA

RB5000 and the 223 JP Carbine Spring

This is so amazing. I am running the 5000 and the 223 JP carbine spring – recoil is greatly reduced, no spring noise, keeping on target is a breeze. Now all my ARs have KynSHOTs in them.

 

Bob, Venice, FL USA

RB5000L - Used on .300 BLK

I am running a PWS .300 BLKOUT 12.75 SBR. It ran fine but after Brian suggested the 5000L with a 223 JPcarbine spring ... It went from good to super bad ass. No recoil no spring noise ... Wow. 

 

Bob, Venice, FL USA

RB5001 - Home Built AR15

All I can say is that many experienced range officers at Nexus Shooting in Davie FL can not believe the lack of recoil and muzzle rise on my home built AR15. One KEY element is to use RIFLE length gas system and a rifle length buffer like the KynSHOT. 

 

BigDave, Fort Lauderdale, FL USA

RB5001 - Unbelieveable!

Got this for my 20'' 1x12'' twist build. Used a PMP reviver set, X-Caliber barrel (lightweight), Sharps BCG, Ace stock with a 1'' extender from Al's custom, Rise Armament Stinger handguard, GO Guns XL Brake, Tubb flat wire buffer spring, SSA-E trigger and other good parts. The first rounds out of this setup was with IMI M193 ball ammo and I thought I had a squib load as the recoil was nothing!!! I have two 308 builds in the works and I will use the AR-10 version of this buffer for both.

 

41AE, USA

RB5004 - Used on PSA AR10

Got one for my PSA AR10 and it made a considerable difference in felt recoil. Just to make sure I switched back to the standard buffer and yep there is definitely a difference between the two. KynSHOT hydraulic buffer works. 

 

Rodel, Columbus, GA USA

RB5004 - Does what it says!

I’m pretty skeptical about any gadget that claims to mitigate recoil but after a bit of research I figured I’d give the KynSHOT a try. I did a side by side test with my recent AR10 build this weekend. Five shots with a standard buffer and spring then five shots with the KynSHOT installed. I was amazed how this buffer took the bite out of the .308 recoil and made it much easier to get accurate follow up shots. Adding a JP Industries tuned spring was the icing on the cake. The KynSHOT has made shooting this rifle out to distance much more fun and definitely made me a believer. 

 

David, Dripping Springs, TX USA

RB5005 - Used on AR10

Very happy with this buffer paired with the orange Springco buffer spring. Had issues with my AR10 cycling due to overpressure especially during suppressed. Swapped out with this buffer and spring and no more cycling issues and l as felt recoil as a bonus.

 

Happyshooter, FL USA

RB5007 - Used on 5.5

This buffer is the best addition to my 9mm 5.5 inch YHM running a 9mm Wraith can. I'm using a JP .308 carbine spring polished and tuned. Now the recoil is greatly reduced and no spring noise from the buffer tube. Improved accuracy and SMOOOTH. Thank you Brian for the suggestion.

 

bob, Venice, FL USA

RB5007 - Like my first one so much I bought 3 more!

The difference between this buffer system and a standard extended heavy buffer is night and day. Felt recoil is reduced significantly and spring noise is almost gone as well. Running it with the Sprinco 308 (orange) spring and it functions perfectly in both my 8" and 5.5" barreled uppers with the SBA3 brace. I'll be back for more!

 

ncsmokey, Lancaster, SC, USA

RB5007 - Used on 6

I bought this hesitantly for my AR-9 using a 6 inch barrel, but was pleasantly surprised to have the recoil reduced drastically. To be accurate in my statement it works smoother while shooting slowly. When you shoot slowly you pretty much do not feel any recoil. As you shoot faster you will start feeling the recoil. However, I am very satisfied with this purchase over a heaver buffer. I might even buy one for my AR shooting 7.62x39. I think it will really do the trick. 

 

Juventino, Laredo, TX USA